<![CDATA[The android app crashes after 5 minutes]]>Good morning, I have app for Android. I connected bluetooth receiver and ntrip server. Everything works very well and gives the correction. The only problem is the application disconnects the transfer every 5 minutes. I then have to press the play button again and it still works fine. It's not a big problem but it's annoying. Can anything be done about it?

]]>https://community.hedgehack.com/topic/17/the-android-app-crashes-after-5-minutesRSS for NodeWed, 13 May 2026 22:27:19 GMTMon, 01 May 2023 09:52:44 GMT60<![CDATA[Reply to The android app crashes after 5 minutes on Fri, 09 Jun 2023 13:24:57 GMT]]>@cecomir88 If you have no coverage in your area, why are you gonna use NTRIP? Please post a screenshot of destination error.

]]>https://community.hedgehack.com/post/67https://community.hedgehack.com/post/67Fri, 09 Jun 2023 13:24:57 GMT<![CDATA[Reply to The android app crashes after 5 minutes on Fri, 09 Jun 2023 12:24:29 GMT]]>I am using android 8

]]>https://community.hedgehack.com/post/66https://community.hedgehack.com/post/66Fri, 09 Jun 2023 12:24:29 GMT<![CDATA[Reply to The android app crashes after 5 minutes on Fri, 09 Jun 2023 12:12:34 GMT]]>What could be the problem, I think I'm messing with the Host setting

]]>https://community.hedgehack.com/post/65https://community.hedgehack.com/post/65Fri, 09 Jun 2023 12:12:34 GMT<![CDATA[Reply to The android app crashes after 5 minutes on Fri, 09 Jun 2023 12:10:18 GMT]]>@ilyavialkov Hello,
the case is the following, I have a GNSS receiver that I want to place on a point with known coordinates and through a local connection between the receiver and its controller via bluetooth or serial to output NTRIP data such as IP, port, access point and so on to set to another device in the case of a drone remote. The whole problem is that at the place I want to fly in RTK mode, there is no coverage of any mobile operator, that is, there is no coverage or internet. I installed the YCserver app on in the GNSS receiver controller, then connected the receiver to the controller, ran the app and created a source (bluetooth) then destination NTRIP I run and it gives me destination error.

]]>https://community.hedgehack.com/post/64https://community.hedgehack.com/post/64Fri, 09 Jun 2023 12:10:18 GMT<![CDATA[Reply to The android app crashes after 5 minutes on Thu, 08 Jun 2023 05:52:45 GMT]]>@cecomir88 when you reach the 100kb limit, It should show the payment prompt.

]]>https://community.hedgehack.com/post/62https://community.hedgehack.com/post/62Thu, 08 Jun 2023 05:52:45 GMT<![CDATA[Reply to The android app crashes after 5 minutes on Wed, 07 Jun 2023 13:59:23 GMT]]>@ilyavialkov how to pay, I can't find a link or anything anywhere

]]>https://community.hedgehack.com/post/61https://community.hedgehack.com/post/61Wed, 07 Jun 2023 13:59:23 GMT<![CDATA[Reply to The android app crashes after 5 minutes on Wed, 10 May 2023 12:23:35 GMT]]>@touritailglm yes. it's not free.

]]>https://community.hedgehack.com/post/52https://community.hedgehack.com/post/52Wed, 10 May 2023 12:23:35 GMT<![CDATA[Reply to The android app crashes after 5 minutes on Wed, 10 May 2023 09:25:03 GMT]]>@ilyavialkov please kindly clarify/confirm that the ycserver app is not free to use but requires payment, right?

]]>https://community.hedgehack.com/post/49https://community.hedgehack.com/post/49Wed, 10 May 2023 09:25:03 GMT<![CDATA[Reply to The android app crashes after 5 minutes on Mon, 01 May 2023 17:11:03 GMT]]>@andy-bachmacka-1958 Hi, If you have no active subscription, the app should show you a subscription prompt every 100kb and stop the session.

If it actually crashes, please tell me your phone model and android version, I'll check the log.

]]>https://community.hedgehack.com/post/48https://community.hedgehack.com/post/48Mon, 01 May 2023 17:11:03 GMT